tool@microtech.ua
+38 (057) 739-03-50
Categories
- Software & connection
- Calipers
- Computerized calipers
- Force calipers
- Digital calipers
- Wide range calipers with long jaws
- Long internal Jaw caliper
- Universal caliper
- Tube caliper
- Outside point caliper
- Inside point caliper
- Offset centerline caliper
- Depth caliper
- Gear tooth caliper
- Scale unit
- Small grooves caliper
- Accessories set for calipers
- Micrometers
- Indicators
- Internal measurings
- Thickness gauges
- Measuring stands
- Calibration stands
- Force gauge
- Height gauge
- Radius gauge
- Protractors & levels
- Measurement instruments museum by MICROTECH
List of products by manufacturer МІКРОТЕХ (Україна)
2D thickness gauge
2D wall thickness gauge developed and manufactured by MICROTECH.For control wall thickness and depth.
Computerized scale unit wireless
Computerized scale unit by MICROTECH is used to precise horizontal linear measurement and positioning for workpieces and machine tables. Modified with computerized MICS indication system with 1,54" resolution.
Curved gauge set for tube wall thickness...
Gauge for curved tubes walls measuring was developed and patented by MICROTECH (Patent US202002129)Curved gauge has 4 interchangeable curved jaws for different tubes radiuses and can be equipped with electronic or computerized measuring modules with resolution 1 or 10 microns.
Depth computerized caliper wireless
Computerized wireless depth caliper was developed and patented (Pat.US 10184772) by MICROTECH. Main advantage of this precision caliper is using computerized measuring system from MICROTECH.It gives possibility have 5 micron resolution and higher accuracy, then competitors calipers.
Depth wireless caliper IP67
Digital wireless depth caliper IP67 was developed and patented (Pat.US 10184772) by MICROTECH. It gives possibility have 10 micron resolution and higher accuracy, then competitors calipers.MICROTECH also equipped this caliper with Force control module, that gives possibility measure all time with a same Force (8N).
Digital depth gauge
MICROTECH produce digital depth gauges for depth measuring with Digital or Computerized indicator head. This gauge has 30, 90 mm (1,2", 3,6") measuring range.
Digital micrometer head
This micrometer head has 25, 50 mm measuring range and IP54 protection class.
Digital scale unit
Digital scale unit by MICROTECH is used to precise horizontal linear measurement and positioning for workpieces and machine tables.
Double low-force caliper IP67
These calipers equipped with patented Force control module to measure all time with a same double Low Force (0,8N). It gives possibility meager soft materials (carton, rubber, plastic, etc.) without deformation.These calipers has 150, 200, 300 mm (6, 8, 12 inch) ranges and has Swiss electronic measuring system with IP67 water proof.
